PS100 Series use a dry-type ceramic piezoresistive sensor chip by special technology.    Ceramic is a recognized material of high elasticity, corrosion & abrasion resistance, strong shock and vibrant resistance.    The thermal stability can make its operating temperature up to -20~80, It achieves high accuracy, high stability. Electrical insulation 2kV, strong output signal, excellent long-term stability. 

SS111 Series are suitable for direct mounting on printed circuit boards.   The sensor is mounted in a stainless steel housing,and the sensor are protected by a thin layer of parylene.This gives full protection layer in applications where condensation can occur.   Continuous exposure to water is not recommended.

SS115 Series are a small profile, media compatible, piezoresitive silicon pressure sensor packaged in a 316L stainless steel housing. It is designed for O-ring mounting where the diaphragm must not be shrouded by weld ring or fitting. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element.  With all the stainless steel pressure transducer diaphragm open is for sanitary purposes such as monitoring of the food, the brewing, medicine and production processes of the dairy, available pressure ranges spanning from 0 psig up to 15000 psig.   The unitized stainless steel design, with a thin diaphragm and heavy sidewalls constructed, makes these sensors very rugged, yet thin enough to measure low pressures.

SS116 Series with all the stainless steel pressure transducer diaphragm open is used for sanitary purposes such as monitoring of the food, the brewing, medicine and production processes of the dairy. 1, High accuracy, high reliability 2, Wide temperature compensation 3, Constant current power supply  4, Gauge pressure, absolute pressure is optional 5, Building isolated able to test various media

SS100 Series are with isolated construction and precise compensation.  It uses high stable silicon chip, housing with outer diameter Ф19mm 316L stainless steel housing. The housing is filled with silicone oil so as to ensure the transfer of the pressure from the diaphragm to the sensing component.   Several millions of these pressure transducers are in use world-wide in a variety of different applications. Main fields of application are: Level technology, pneumatics, hydraulics, avionics.

SS112 Series with all the stainless steel pressure transducer diaphragm open is used for sanitary purposes such as monitoring of the food, the brewing, medicine and production processes of the dairy.  The 316L SS flush diaphragm ensures a crevice free seal between the process connection and the pressure measuring diaphragm. The permanently sealed sensing system is designed for "clean in place" (CIP) and "sterilize in place" (SIP) maintenance procedures. The transducers are available with industry standard 1.5" or 2" Tri-Clamp connections.

SS120 Series are isolated with the stainless steel diaphragm. Has integrated construction, high static pressure, high stablity and good reliablity. The sides of the high and low pressure are protected by the isolated diaphragm, these transducers are made of a high sensitivity silicon chip . This chip is protected by a stainless steel body and a concentric corrugated membrane to againest the environmental influences    The housing is filled with silicone oil so as to ensure perfect transfer of the pressure from the diaphragm to the sensor. All metal parts in contact with the fluid are made of stainless steel 316L. The sealing of the housing is completely sealed vacuum. Millions of units are in operation worldwide in many applications. The main fields of application are: level measurements, pneumatic, hydraulic, aerospace, etc. 

SS108 Series cover a range of pressures from 400kPa to 100MPa, have a diameter of only 13mm, these transducers are made of a high sensitivity silicon chip . This chip is protected by a stainless steel body and a concentric corrugated membrane from environmental influences . The housing is filled with silicone oil so as to ensure perfect transfer of the pressure from the diaphragm to the sensor. All metal parts in contact with the fluid are made of stainless steel 316L. The sealing of the housing is completely sealed vacuum.   Millions of units are in operation worldwide in many applications. The main fields of application are: level measurements, pneumatic, hydraulic, aerospace, etc.

SS121 with isolated construction and precise compensation are designed for OEM clients,is mounted with the compensation resistors in a stainless steel housing. The sensor floats on an O-ring seal and is therefore free of any housing stresses,it is easy to use and with many different type of presure ports to choose.    All type uses high stable silicon chip,and housing with stainless steel.

SS108 Series cover a range of pressures from 400kPa to 100MPa, have a diameter of only 13mm, these transducers are made of a high sensitivity silicon chip . This chip is protected by a stainless steel body and a concentric corrugated membrane from environmental influences . The housing is filled with silicone oil so as to ensure perfect transfer of the pressure from the diaphragm to the sensor. All metal parts in contact with the fluid are made of stainless steel 316L. The sealing of the housing is completely sealed vacuum.   Millions of units are in operation worldwide in many applications. The main fields of application are: level measurements, pneumatic, hydraulic, aerospace, etc.

SS105 Series are the cheaper version for pressure ranges from 200kPa to 10MPa. They have a diameter of only  14mm without compromising quality and performance. The standard version is supplied with connection pins  (External compensation is optional) A high sensitivity piezoresistive silicon chip is used for detection of the pressure. This chip is protected against  environmental influences by a sealed stainless steel casing with a concentrically corrugated membrane.  The housing is filled with silicone oil to the transmission of the pressure from the membrane to the sensitive part. Typical Applications: Measurement of altitude, aviation electronics, meteorology, servo, robotic, hydraulic, sanitary  and pharmaceutical engineering, underground mining,engineering injection ... 

SS107 Series cover a range of pressures from 200kPa to 10MPa, have a diameter of only 15mm, these transducers are made of a high sensitivity silicon chip . This chip is protected by a stainless steel body and a concentric corrugated membrane from environmental influences . The housing is filled with silicone oil so as to ensure perfect transfer of the pressure from the diaphragm to the sensor. All metal parts in contact with the fluid are made of stainless steel 316L. The sealing of the housing is completely sealed vacuum.   Millions of units are in operation worldwide in many applications. The main fields of application are: level measurements, pneumatic, hydraulic, aerospace, etc.

SS103 Series are the cheaper version for pressure ranges from 10kPa to 10MPa. They have a 5.6mm height without compromising quality and performance. The standard version is supplied with connection pins (External compensation is optional) A high sensitivity piezoresistive silicon chip is used for detection of the pressure. This chip is protected against environmental influences by a sealed stainless steel casing with a concentrically corrugated membrane. The housing is filled with silicone oil to the transmission of the pressure from the membrane to the sensitive part.   Typical Applications: Measurement of altitude, aviation electronics, meteorology, servo, robotic, hydraulic, sanitary and pharmaceutical engineering, underground mining, engineering injection ...

SS204 Series are designed for refrigeration industry,oil pressure monitoring,braking system,A/C system and other industry. Adopting a high quality piezoresistive silicon chip as the sensor element and combing with a high stabale ASIC(application-specific integrated circuit), this ensure that the sensor working well in poor working conditions.   It has a beautiful appearance, reliable performance, low cost and install simple, the sensors are wildly accpeted by our clients.

SS204 Series are designed for refrigeration industry,oil pressure monitoring,braking system,A/C system and other industry.   Adopting a high quality piezoresistive silicon chip as the sensor element and combing with a high stabale ASIC(application-specific integrated circuit), this ensure that the sensor working well in poor working conditions.   It has a beautiful appearance, reliable performance, low cost and install simple, the sensors are wildly accpeted by our clients.

SS301 Series combine the latest in Application Specific Integrated Circuit (ASIC) technology with proven media isolated stainless steel diaphragm design.  This digitally compensated sensor offers an unparalleled value and performance combination making it the ideal pressure sensing solution for demanding applications. Fully temperature compensated, calibrated, and amplified.   The SS301 Series is available in 10KPa to 40 MPa pressure ranges.

SS207 Series are designed for refrigeration industry,oil pressure monitoring,braking system,A/C system and other industry. Adopting a high quality piezoresistive silicon chip as the sensor element and combing with a high stabale ASIC(application-specific integrated circuit), this ensure that the sensor working well in poor working conditions.   It has a beautiful appearance, reliable performance, low cost and install simple, the sensors are wildly accpeted by our clients.

SS207 Series are designed for refrigeration industry,oil pressure monitoring,braking system,A/C system and other industry. Adopting a high quality piezoresistive silicon chip as the sensor element and combing with a high stabale ASIC(application-specific integrated circuit), this ensure that the sensor working well in poor working conditions.   It has a beautiful appearance, reliable performance, low cost and install simple, the sensors are wildly accpeted by our clients.

SS207 Series are designed for refrigeration industry,oil pressure monitoring,braking system,A/C system and other industry. Adopting a high quality piezoresistive silicon chip as the sensor element and combing with a high stabale ASIC(application-specific integrated circuit), this ensure that the sensor working well in poor working conditions.   It has a beautiful appearance, reliable performance, low cost and install simple, the sensors are wildly accpeted by our clients.

SS205 Series are designed for refrigeration industry,oil pressure monitoring,braking system,A/C system and other industry. Adopting a high quality piezoresistive silicon chip as the sensor element and combing with a high stabale ASIC(application-specific integrated circuit), this ensure that the sensor working well in poor working conditions.   It has a beautiful appearance, reliable performance, low cost and install simple, the sensors are wildly accpeted by our clients.

SS205 Series are designed for refrigeration industry,oil pressure monitoring,braking system,A/C system and other industry. Adopting a high quality piezoresistive silicon chip as the sensor element and combing with a high stabale ASIC(application-specific integrated circuit), this ensure that the sensor working well in poor working conditions.   It has a beautiful appearance, reliable performance, low cost and install simple, the sensors are wildly accpeted by our clients.

SS205 Series are designed for refrigeration industry,oil pressure monitoring,braking system,A/C system and other industry. Adopting a high quality piezoresistive silicon chip as the sensor element and combing with a high stabale ASIC(application-specific integrated circuit), this ensure that the sensor working well in poor working conditions.   It has a beautiful appearance, reliable performance, low cost and install simple, the sensors are wildly accpeted by our clients.

SS205 Series are designed for refrigeration industry,oil pressure monitoring,braking system,A/C system and other industry.   Adopting a high quality piezoresistive silicon chip as the sensor element and combing with a high stabale ASIC(application-specific integrated circuit), this ensure that the sensor working well in poor working conditions.   It has a beautiful appearance, reliable performance, low cost and install simple, the sensors are wildly accpeted by our clients. 

SS301 Series combine the latest in Application Specific Integrated Circuit (ASIC) technology with proven media isolated stainless steel diaphragm design.  This digitally compensated sensor offers an unparalleled value and performance combination making it the ideal pressure sensing solution for demanding applications. Fully temperature compensated, calibrated, and amplified.   The SS301 Series is available in 10KPa to 40 MPa pressure ranges.

SS307 Series have a piezoresistive ceramic pressure sensor giving it excellent media compatibility. The housing is made from stainless steel with a choice of internal O-ring seals to select to ensure the product is suitbale for a wide range of applications.  Every device is temperature compensated and calibrated. it gives out a current signal 4~20mA or voltage signal 1~10V directly proportional to the pressure value present on the system to which they are connected.   The sensor incorporate a microprocessor based amplifier, this means there are no adjusting pots and the sensors are very stable.

SS307 Series have a piezoresistive ceramic pressure sensor giving it excellent media compatibility. The housing is made from stainless steel with a choice of internal O-ring seals to select to ensure the product is suitbale for a wide range of applications.  Every device is temperature compensated and calibrated. it gives out a current signal 4~20mA or voltage signal 1~10V directly proportional to the pressure value present on the system to which they are connected.   The sensor incorporate a microprocessor based amplifier, this means there are no adjusting pots and the sensors are very stable.

SS302 Series are piezoresistive silicon sensor designed specifically for OEM applications.  The sensor is mounted in a 316L stainless steel package with a small volume of oil between the diaphragm and sensor. The pressure housing uses the oil to transmit the pressure from the diaphragm to the sensor. High measurement accuracy is provided through extensive sensor characterization.   Zero and span adjustable is optional, and performance is good and reliable.

SS302 Series are piezoresistive silicon sensor designed specifically for OEM applications.  The sensor is mounted in a 316L stainless steel package with a small volume of oil between the diaphragm and sensor. The pressure housing uses the oil to transmit the pressure from the diaphragm to the sensor. High measurement accuracy is provided through extensive sensor characterization.   Zero and span adjustable is optional, and performance is good and reliable.

SS302 Series are piezoresistive silicon sensor designed specifically for OEM applications.  The sensor is mounted in a 316L stainless steel package with a small volume of oil between the diaphragm and sensor. The pressure housing uses the oil to transmit the pressure from the diaphragm to the sensor. High measurement accuracy is provided through extensive sensor characterization.   Zero and span adjustable is optional, and performance is good and reliable.

SS400-1 Series are fully sealed to withstand external high pressure washdowns. These units are packaged in rugged welded stainless steel housings and are exceptionally insensitive to vibration, shock and environmental extremes. A small size and tri-clover sanitary pressure ftting allow direct mounting in most CIP and SIP installations.   The sensor is mounted in a 316L stainless steel package with a small volume of oil between the diaphragm and sensor. The pressure housing uses the oil to transmit the pressure from the diaphragm to the sensor. High measurement accuracy is provided through extensive sensor characterization.   These pressure transmitters are in use world-wide in a variety of different applications. Main fields of application are: food, dairy, beverage and pharmaceutical processing, liquid level control, and sanitary pipelines.

SS301 Series combine the latest in Application Specific Integrated Circuit (ASIC) technology with proven media isolated stainless steel diaphragm design.  This digitally compensated sensor offers an unparalleled value and performance combination making it the ideal pressure sensing solution for demanding applications. Fully temperature compensated, calibrated, and amplified.   The SS301 Series is available in 10KPa to 40 MPa pressure ranges.

SS303 Series are piezoresistive silicon sensor designed specifically for OEM applications.  The sensor is mounted in a 316L stainless steel package with a small volume of oil between the diaphragm and sensor. The pressure housing uses the oil to transmit the pressure from the diaphragm to the sensor. High measurement accuracy is provided through extensive sensor characterization.   Zero and span adjustable is optional, and performance is good and reliable.

What is RTD? Resistance Temperature Detectors(RTDs) are temperature sensors that contain a resisor that changes resistance value as its temperature changes. they have been used for many years to measure temperature in laboratory and industrial processes,and have developed a reputation for accuracy, repeatability and stability. Why use an RTD in stead of a thermocouple or thermistor sensor? Each type of temperature sensor has a particular set of conditions for which it is best suited. RTDs offer several advantages: 1, A wide temperature range(-50~500°C for thin-film and -200 to 850°C, RTDs can be used in all but the highest-temperature in dustrial processes. When made using metals such as platinum, they are very stable and are not affected by corrosion or oxidation. Other materials such as nickel, copper, and nickel-iron alloy have also been used for RTDs. However, these materials are not commonly used since they have lower temperature capabilities and are not as stable for repeatable as platinum.